Nanoscale Research Paves Way for “Next-Generation” Li-Ion Batteries

Why Silicon Anodes in Lithium-Ion Batteries Rapidly Degrade

A recent study from Penn Engineering researchers provides new insights into why silicon anodes in lithium-ion batteries rapidly degrade and fail. Using advanced imaging techniques and high-contrast gold to stand in for silicon, they’ve shown how pieces of the anode are trapped in the chemical layer that forms in each cycle, gradually hollowing out the anode until it falls apart. Credit: Penn Engineering

Rechargeable lithium-ion batteries are ubiquitous, powering smartphones, tablets, laptops and, increasingly, electric vehicles. Making these batteries lighter, smaller, cheaper and able to charge faster, all without sacrificing performance, is therefore a major design challenge. To tackle this problem, scientists and engineers are developing new electrode materials that can store greater amounts of lithium in the same amount of space.

One promising solution is the use of alloy-type materials in a battery’s negative electrode, also known as the anode. For example, one pound of silicon — which produces an “alloy-type” anode — can store about the same amount of lithium as ten pounds of graphite, which is found in the “intercalation-type” anodes currently used in commercial lithium-ion batteries. This means that replacing the latter with the former could potentially make the anode 10 times lighter and considerably smaller.

Despite this promise, alloy-type anodes have not seen widespread adoption. This is partly because when lithium ions are inserted into the alloy-type silicon particles within the anode, those particles begin to expand and break apart, resulting in a battery that fails after only a few charging cycles. Reducing the size of these particles so their features are at the nanoscale — such as in nanoporous silicon — mitigates this kind of degradation, but the actual mechanisms at play are not fully understood.

Now, in a study published in ACS Energy Letters, Penn Engineering researchers have revealed the complicated electrochemical process that occurs at the nanoscale when alloy-type anodes charge and discharge. A better understanding of the degradation behavior that is currently impeding this promising class of energy storage materials could open the door to new, more efficient battery designs.

Anode Degradation Process

The basic model for how general alloy-type anode degradation occurs prior to this study is shown in the top part of this illustration. When a lithium-ion battery with a silicon anode charges, particles of silicon (light blue) physically grow as they take in lithium ions. A layer of SEI, or solid-electrolyte interphase (gray), also forms around these lithium-containing silicon particles (dark blue), only to break off when the battery discharges. This study provides new insights into the cause of the degradation, as seen in the bottom part of the illustration. During charging, pieces of silicon become trapped in the SEI, leaving the original particle porous when the SEI separates from it during discharging. As this process repeats, the particle shrinks more and more, until it ultimately falls apart. Credit: Penn Engineering

The study was conducted by Eric Detsi, Stephenson Term Assistant Professor in the department of Materials Science and Engineering (MSE), along with graduate research assistants John Corsi and Samuel Welborn. They collaborated with Eric Stach, professor in MSE and director of the Laboratory for Research on the Structure of Matter (LRSM).

As their name suggests, lithium-ion batteries store energy through an electrochemical reaction between lithium from the positive electrode, also known as the cathode, and the material in their anode. As lithium ions physically enter the spaces in the anode’s lattice during charging, they bond with that material and absorb electrons in the process; discharging the battery removes the lithium so the process can be repeated, but in the case of alloy-type anodes, also causes the anode material to grow and eventually break apart.

There are multiple intermediary steps in these processes; understanding how they differ between dense silicon and nanoporous silicon might give some hint as to why the latter better resists degradation. However, close investigation of these processes in action has been stymied by challenges in imaging the relevant silicon structures at such small scales.

“To address this challenge,” Detsi says, “we used a unique combination of transmission electron microscopy and X-ray scattering techniques to study the degradation of lithium-ion battery anodes during charging and discharging.”

“We used gold instead of silicon because gold yields better contrast during electron microscopy imaging than silicon,” adds Welborn, “which allows for clear detection of the solid-electrolyte interphase surface coating, known as SEI, that forms on the gold electrode during charging and discharging. Gold also scatters more X-rays than silicon, which makes it easier to probe changes to the anode structure during those processes.”

For this study, the team used the electron microscopy facility at the Singh Center for Nanotechnology, as well as the Penn Dual Source and Environmental X-ray Scattering (DEXS) facility in the LRSM. The results from these two techniques formed a rich dataset that allowed the researchers to update the previously understood model for how this degradation process occurs.

These instruments allowed the team to identify the crucial step during discharge: the formation of a thick SEI layer on the porous gold surface.

“As lithium is stored in gold, the volume of the metallic gold ligaments in the nanoporous structure rapidly expands, eventually breaking,” Corsi says. “These fractured ligament pieces become trapped within the surrounding SEI layer. When the process is reversed, the ligaments contract as lithium is removed and this volume change causes the SEI layer containing trapped material to crack and separate from the rest of the electrode.”

As the battery is charged again, a fresh SEI layer grows on the surface, collecting more fractured pieces of the electrode. This damage accumulates over repeated charging cycles, with large pieces of the electrode eventually splitting off and causing the battery to rapidly fail.

The researchers believe that the insights obtained for nanoporous gold have wide-ranging implications for other highly studied, promising alloy-type anode materials such as silicon and tin. Understanding the mechanisms for how these anodes degrade over time will allow researchers to design long-lasting, high-energy-density battery materials.

Reference: “Insights into the Degradation Mechanism of Nanoporous Alloy-Type Li-Ion Battery Anodes” by John S. Corsi, Samuel S. Welborn, Eric A. Stach and Eric Detsi, 12 April 2021, ACS Energy Letters.
DOI: 10.1021/acsenergylett.1c00324

This research was supported by the National Science Foundation (NSF) (DMR-1720530) and Vagelos Institute for Energy Science and Technology (VIEST) through a 2018 VIEST graduate fellowship.